NES Scanner / Mobile Scanner Not Working on Windows 10/11
A Windows update can cause the USB driver for the NES scanner or Mobile Scanner to stop working. Steps to resolve:
- Close ProVision
- Plug the miHealth and scanner into USB ports — unplug all other USB devices
- Right-click the Start button → Device Manager
- For each item named HID-compliant device and USB Input Device: right-click → Uninstall → confirm
- Close Device Manager
- Unplug both the miHealth and scanner
- Restart the computer
- If it gets stuck on the restart screen for more than a few minutes, hold the power button for 10 seconds to force off. Wait 10 seconds, then power on normally — it may take slightly longer than usual to boot.
- Plug the scanner back in — the driver should install automatically (may take 1–2 minutes)
- Open ProVision → add a test client → attempt a scan
- Remove the scanner, plug in the miHealth, repeat steps 9–10
Note: This fix was originally documented for Windows 10, but the same steps apply if the issue occurs on Windows 11.