GEM not charging / light not turning on / not holding a charge
Symptoms: GEM won't charge, GEM is dead, GEM light not coming on, GEM not responding to charger, GEM battery drains quickly, GEM appears off, charging light not showing, flashing red light on charger, red light keeps flashing
Q: My client's GEM won't charge — what do I do?
Q: The GEM light isn't turning on when plugged in — is it broken?
Q: The GEM was fully dead and now nothing is happening on the charger — is this normal?
Q: The red light keeps flashing when the GEM is on the charger — what does that mean?
Understanding the flashing red light:
A flashing red light is normal when the GEM battery is very low — it is an invitation to charge. Once connected to the charger, the flashing red should turn to a solid red (indicating it is now charging) within about 1 minute, as the battery needs time to build a base charge before it can power the indicator light steadily.
A:
1. Use a Q-tip and rubbing alcohol to clean the charging connectors on the back of the GEM and on the charger.
2. Reconnect the GEM to the charger — bring the charger close to the back of the GEM and let them snap together magnetically to ensure a solid connection.
3. Wait 1 minute. The flashing red light should turn to a solid red, confirming the GEM is now charging. If no light appears after 1 minute, check that the connection is secure and the power source is working.
4. Once the solid red light confirms charging, press and hold the GEM button for 20 seconds — this forces the GEM to reboot. The top light may turn on and off during this time — this is normal.
5. After the reset, the solid red light should return to confirm the GEM is charging normally.
Note: There is no power-on button on the GEM. When the GEM has charge, it is on. The GEM button only turns Bluetooth on and off.