"Last Measurement" indicator is not up to date

Symptoms: last measurement wrong, last reading showing old time, GEM hasn't taken a reading, last scan outdated, pulse reading timestamp incorrect, GEM not detecting pulse, measurement not recording, last reading stuck

Q: The "Last Measurement" time on my app is hours old — is my GEM taking readings?

Q: My GEM seems to have stopped recording pulse readings — what should I do?

Q: The last measurement indicator hasn't changed all day even though I've been wearing the GEM.

A:

Work through these steps in order:

Step 1 — Reset the GEM

Connect the GEM to the charger and press and hold the GEM button for 20 seconds (see GEM Reset instructions above).

Step 2 — Run a Correct program

Send any Correct program from the app to confirm the Bluetooth connection is working.

Step 3 — Check for app and firmware updates

Follow the app and firmware update steps above.

Step 4 — Log out, restart Bluetooth, log back in

1. Log out of the E4L GEM app.

2. Close the app completely.

3. Restart Bluetooth on the phone (turn off then back on).

4. Open the app and log back in.

Step 5 — Wait and observe

Ask the user to wear the GEM normally and wait a couple of hours to see if the Last Measurement updates.

Step 6 — If no change after 24 hours — Upload Logs and notify support

1. Ask the user to wait 24 hours wearing the GEM as normal.

2. In the app, go to Profile icon (top left) → Manage Devices → Upload Logs.

3. Send a notification to customerservice@E4L.com including:

- A summary of all troubleshooting steps taken

- The user's email address

- The approximate date and time the logs were uploaded


Still need help?

Our assistant can answer most questions straight away, and passes anything it can't to the support team.