BioSync Software
The BioSync software is used for the update of the E4L miHealth devices by either practitioners in their clinic or clients at home. The BioSync software also allows your clients to remote scan from home.
In order for your clients to remote scan at home with BioSync, they will need either an E4L miHealth or a E4L/NES Scanner device. Both of these can be purchased from the NES Health Portal (http://portal.e4l.com).
Please note that for voice scanning, BioSync is not needed. It can be done directly within the E4L Health Portal.
Please click one of the following to begin downloading BioSync:
After the download is complete double click on the downloaded file and step through the on-screen installation instructions.
Once BioSync is installed:
If you have an E4L/NES Scanner device then you are ready to connect it and begin.
If you have an E4L/NES miHealth, be sure to turn on the device, connect it, then begin. Please make sure to use the cord that came with your device to connect your miHealth to your computer. If you need a USB to USB-C adapter, please use a block type adapter like this:https://amzn.to/4b3Nwz7
Once your device is connected, open BioSync and Click on “Scan.”
Log in using the email and password of the person you want to scan.
When the device is detected, place hand on scanner and click “Start Scan”.
Once completed, your scan will automatically be sent to your practitioner.
Comments
0 comments
Article is closed for comments.