NES miHealth (Gen 1) — Screen Orientation Reset
For the NES miHealth (Gen 1)
This article applies only to the NES miHealth (Gen 1). It does not apply to the E4L miHealth (Gen 2).
If your miHealth screen orientation is flipping, getting stuck, or upside-down, perform the miHealth Screen Orientation Reset.
- Locate the two side buttons, the on/off button, and the left-hand front button.
- Press and hold all four buttons. Then release the side buttons and power button while still holding the front left button.
- Once the screen turns back on, you will see a request to place the unit on its back. Perform the action and press OK.
- The screen will then prompt you to place the unit on its right side. Do so and press OK while on its side.
- Once completed, the device will reset itself with the correct screen orientation.