E4L miHealth: won't charge, won't turn on, or the battery runs down quickly

For the E4L miHealth (Gen 2)

For the E4L miHealth (Gen 2).

Won't turn on or doesn't seem to charge

1. Charge it from a wall charger

  • Use a USB-C phone charging block plugged into the wall, with the USB-C cable. A charging block isn't included in the box, but any USB-C phone charger works.
  • A computer's USB port may not give enough power to charge the miHealth fully.

2. Give a completely empty battery time to wake up

  • When the battery is fully empty, the screen can stay black for about 5 minutes after you plug it in.
  • After 5 minutes, check that it's charging: on software 1.7.5 or later, press the top middle button once to wake the screen. On earlier software, tap the dark screen 3 times.
  • If the battery icon appears and is moving, the miHealth is charging. Leave it to charge for at least another hour, then unplug it and turn it on.

3. Turn it on with a firm press

  • The power button is on the bottom of the device, to the right of the charging port. It needs a firm press.
  • Press and hold it for 3–5 seconds until the screen turns on.
  • The miHealth comes in a protective silicone sleeve. The first time, it can help to peel the sleeve back to find the power button, then put the sleeve back on.

4. Force a restart

  • If it still won't turn on, keep it plugged in and press and hold the power button for up to 20 seconds. This forces the miHealth to restart.

5. Try another cable and charger

  • If nothing appears after 5 minutes of charging, try a different USB-C cable and a different charging block.

6. Once it turns on, run the software update

  • Battery use has been improved in several recent updates, so always install the latest update.
  • Then go to Settings → miUnit and let us know the software version shown.

Making the battery last longer

  • In Settings, turn off Wi-Fi and Bluetooth. They're only needed for scanning, updating or syncing.
  • In Settings → Screen, lower the brightness and set the screen to turn off after 1 minute.
  • Charge it often, for example between sessions. Even 10 minutes of charging adds a good amount of battery.
  • After you stop using it, the miHealth stays on for an hour before switching itself off. Turn it off with the power button when you're done.
  • If it runs down while it's switched off, see Known Issue: Battery Drains When Device Is Powered Off.

Still not charging or turning on?

Contact customerservice@e4l.com with your miHealth unit number (Settings → miUnit, if the screen works) and what you've tried. The miHealth has a 1-year warranty covering defects.

Still need help?

Our assistant can answer most questions straight away, and passes anything it can't to the support team.