E4L miHealth: freezing, slow, or switching off during a program

For the E4L miHealth (Gen 2)

For the E4L miHealth (Gen 2).

Screen freezing was most common on software before version 1.7.5. Updating to 1.7.5 doesn't fix it on its own: a miHealth that has been freezing needs a factory reset.

1. Check your software version

  • Go to Settings → miUnit and read the Software Version.

2. If the version is earlier than 1.7.5

  1. Do a factory reset: E4L miHealth Factory Reset.
  2. Update to the latest software. If the version was 1.6.2, the miHealth can't update over Wi-Fi: follow the computer-based update instructions first.
  3. Do a Log In & Sync to bring your programs back.

3. If the version is 1.7.5 or later

4. If you've already done these steps and it still freezes, stops or switches off

  • Charge it. A low battery is the most common reason a program stops or the miHealth restarts. Charge it for at least 30 minutes from a wall charger.
  • Do a soft reset:
    1. Turn on the miHealth.
    2. Press and hold the two grey buttons (left and right).
    3. Press and release the middle button.
    4. Release the two grey buttons.
    5. When asked whether to do a hard reset, select Yes. The miHealth turns off.
    6. Turn it back on.

Stopping a program: tap Stop twice. The double tap is deliberate, so a program isn't stopped by accident.

Still having problems?

Contact customerservice@e4l.com with your miHealth unit number and software version (Settings → miUnit).

Still need help?

Our assistant can answer most questions straight away, and passes anything it can't to the support team.