How to Reset Your miHealth 2 Device
For the E4L miHealth (Gen 2)
This is a soft/hard reset for the Gen 2 (E4L miHealth). After the reset, you must set the time and date and re-sync using the credentials below before the device can download your folders again.
Step 1 — Check for Updates First
Before attempting a reset, connect your miHealth 2 to Wi-Fi and check for system updates:
Settings → Update Device
Restart the device and check if the issue is resolved. If not, proceed with the reset below.
Step 2 — Perform the Reset
- Turn on the miHealth 2.
- Press and hold the two grey buttons (one on each side of the device).
- While holding both grey buttons, press and release the middle button.
- Release the two grey buttons.
A message will appear on the screen asking if you want to do a hard reset. Select Yes. The device will turn off.
Step 3 — Set Time and Date
Turn the device back on. Before connecting to Wi-Fi or syncing, set the correct time and date.
⚠️ The time and date must be accurate for the device to connect to the server and download your folders. Do not skip this step.
Step 4 — Connect to Wi-Fi and Re-Sync
- Connect the device to your Wi-Fi network.
- Go to Settings → Log in & Sync.
- Enter the following credentials (type slowly — the on-screen keyboard is small):
Email:2@2.com
Password:123
Once entered, the device will be authorised on the network and will begin downloading your programs and folders.
If this does not resolve the issue, contact E4L support at customerservice@E4L.com.